The hyperboloid glass curtain wall has a unique shape and smooth lines, which can meet the architectural design needs of designers, fully express the architectural design concept and meaning, and at the same time meet people's requirements for the overall architectural aesthetics.

Considerations for hyperboloid glass curtain wall materials:

The cost of processing panel glass into hyperboloid will be very high and the production cycle will be long. Therefore, it is the best choice to reasonably use triangular flat glass to simulate hyperboloid. Its advantages are:

1. Using flat glass, short processing period and low cost;

2. The whole model consists of countless planes forming a hyperboloid, which has the multi-plane light reflection effect of diamonds, and has the architectural artistic beauty of diamonds.

Features of hyperboloid glass curtain wall:

1. The six adjacent pieces of glass meet at one point; the six pieces of glass fixed at one point are not on the same plane, that is, the adjacent glasses are not coplanar, and there is an angle between the adjacent glasses.

2. As the surface material of the outer protective structure, glass is constantly deformed under wind pressure.

3. Due to the complexity of the structure, each of the six adjacent pieces of glass

The angles of the angles vary in size and change for each point.

4. Most of the same fixed point is where 6 pieces of glass converge to one point, but there are cases where 4, 5 or 7 pieces of glass converge to one point.

Through the introduction of the related content at the front, it is concluded that the triangular flat glass simulates the hyperboloid glass curtain wall, and the panel glass fixing accessories are preferably jointed with ball hinges.

There are two types of options according to the different fixing positions of the ball joint jig for sewing.

A ball hinge fixture for seam is fixed at the intersection of triangular panel glass. The fixture is a circular hyperboloid ball hinge fixture, model: YQGCJ01.

Tianjin Tianshi Industrial Park Botanical Garden Greenhouse

Weihai Civic Center

Lutai Convention and Exhibition Center

Feicheng Xingrun Taodu Mingzhu Building

InterContinental Wuhan Xincheng International Expo Center

The advantages of circular hyperboloid spherical hinge fixture:

1. The two spherical hinges inside and outside the glass and the thickness of the glass in the middle clamping part just form a sphere. The center of the sphere is close to the center of the thickness of the glass, and the glass can deform freely. In this way, each piece of glass can be rotated at a certain angle around its respective spherical center, which can solve the problem that the adjacent six pieces of glass are not coplanar, and the angle between the adjacent glasses is compensated, and the glass is generated by wind pressure. The need for deformation.

2. The adjacent glass is usually separated by a partition plate. The partition plate of the hyperboloid spherical hinge fixture is designed on the back cover of the fixture and connected by a sliding groove. Each partition plate can be rotated 360° in the chute and fixed at any position by a locking screw, thus solving the problem of unequal glass angles.

3. The number of partition plates in the chute can be increased or decreased arbitrarily according to actual needs, that is, it can be suitable for 4, 5, 6 or 7 glasses.

4. The connecting bolt between the ball hinge fixture and the female seat adopts the ball head structure-ball head bolt. The ball head bolt and the female seat connected to it can be adjusted internally and externally to ensure the distance between the glass surface and the steel structure surface.

5. The ball hinge fixture can be adjusted automatically through the ball head bolts, which solves the problem that the center line of the female seat and the normal line of the hyperboloid cannot be guaranteed to be overlapped during the construction of the hyperboloid glass curtain wall, and realizes the natural and smooth curtain wall, and at the same time, it is beneficial to the glass. force.

Another type of seam is fixed at the seam between two pieces of glass with a ball hinge clamp. The clamp is a ball hinge joint for sewing, model: TWJ5.

Sanya Haitang Bay International Shopping Center

Advantages of ball joints for sewing:

1. The two spherical hinges inside and outside the glass and the thickness of the glass in the middle clamping part just form a sphere. The center of the sphere is close to the center of the thickness of the glass. The glass can deform freely, so that the gap between adjacent glasses

The included angle is compensated, and at the same time, it meets the need for glass deformation due to wind pressure.

2. The two ends of the adjacent glass room are separated by a ball hinge joint and fixed at the same time. Therefore, the number of adjacent glass plates is not affected and is suitable for various glass angles.

3. It can be moved arbitrarily along the direction of the glass joint, and there is no restriction on the construction error.

4. The distance between the glass and the steel structure can be adjusted by the screw on the joint ball joint.

5. The spherical hinge structure can solve the problem that the center line of the fixture does not coincide with the glass angle bisector.